Goolsky Original SURPASS High Performance 2216 1120KV 14 Poles Brushless Motor for RC Airplane Fixed-wing

Well built and has performed well. The easily removable prop mount would make replacing a bend shaft simple if the need arose.

This motor has amazed me, I used it on a long range fpv build and with a 3S 5200mAh battery and staying around 1/3 throttle I can get around a 45 minute to 1 hour flight time. Amazing! I tried measuring the current draw at full power however I was unable to since my multimeter could only go to 15A but here's the data I collected with an APC Slowfly 10x4.7 and a 3S battery.25% - 265g - 2.4A50% - 575g - 7A75% - 890g - 14.6AWithout the multimeter I was able to get around 1400 grams of thrust at full power. When in flight I could get the power draw to be around 4-5A flying level with an almost 900 gram plane (2 pounds).

I was able to install this motor on my RC glider volantex phoenix S 1600 and it works fine, better than the original with a 3S battery.

I haven't used this much yet, but it seems to work pretty well and it looks great. I really like that it comes with all the attachments you'd need to mount it.

Put this on my phoenix S 1600 with a 10x4 prop. Goes vertical on 3s&4s.

This motor worked very well on a 2lb Super sportster RC plane. It had plenty of power for loops, rolls, and climbs with plenty of power to spare. I was using 30 amp esc and a 3s 2200 mah lipo getting around 12 to 14 minutes of flight time.

I used it as a replacement motor on a glider. I could not verify the diameter of the shaft and it is too big for my application. I wish the description would have provided full specification of the motor. I did take a known gamble. My 3 star rating is for lack of specifications in the description. The motor itself looks well made and worked find when bench tested it.

Used as a replacement motor for a Skylark F3A pattern plane. Smooth and powerful.