9" Wave Windshield For Harley FLHT FLHTC FLHX Touring Electra Street Glide 2014-2019 Smoked Dark Motorcycle Windscreen
Brand | Skdorpfm |
Item Weight | 1.15 pounds |
Package Dimensions | 23 x 10 x 3.3 inches |
Country of Origin | China |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | Windshield Windscreen |
Position | Upper, Front |
R**N
2017 Street Glide
Installed on my 2017 Street Glide and i have a few comments.1: I am 6'3" and was skeptical about ordering a 9" windscreen as I have seen some bikes with taller windscreens (don't know the height that I thought looked funny) They are great for long rides however not the style i wanted for everyday riding. To my pleasant surprise this windscreen looks great (I will post some pics soon in the daylight). The vertical rise is NOT 9" it is 7". The total "height" of the overall windscreen is 9" (if that makes sense) but it sweeps or curves back making the actual vertical rise only 7".2: Windscreen is slightly thicker than the stock one and is not a perfect match to the curve of the upper fairing however due to it being plastic and somewhat flexible it did not cause an issue for me.3: Not the same width as the stock windscreen. It is about a 1/8th-1/4th of an inch narrower on each side causing there to be a small gap that could allow rain to get into the inside of the fairing. I personally don't see this to be a major issue just FYI.4: Due to the curvature of the windscreen it does not provide the same clarity as stock when looking through it so if you are shorter it may cause some issues. Does not for me personally.- All things said I would buy again knowing what I do. I will update with photos soon.
O**X
Good product for the price - fitment is an issue
I am in search of a good windshield for my 2019 Street Glide Special.Have tried a few of the "affordable" windshields on Amazon. So far this has been the best, but not perfect.The plastic is nice and thick. Maybe even a little thicker than the stock windshield.The edges are finished and rounded off. They look good.The windshield does not precisely fit into the fairing though. The curve of the windshield is slightly less than the curve of the batwing fairing.And since the plastic is nice and think it's tough to get it into the fairing and get the screws tightened. When you finally do the fairing isn't perfectly flush against the windshield. Not going to let this go long term.But the windshield itself works great. The wind protection is good and no buffeting behind it. If I can get the fit issue solved this will be a winner. Otherwise I'll end up buying the brand name equivalent.
J**Y
Better than expected
The fit is not bad, small gap( barely noticeable). Definitely better than stock windshield in regards to wind buffeting. I'm 6'1'' and my eyeline is about 2 inches above the windshield. The windshield does a good job deflecting the wind over my head. Not bad for the price.
R**H
Great for the $$$$
Not 100% Perfect but pretty dang close and for $30 versus $150 for a Klock Werks windshield this is a great deal. It's a pinch thicker then OEM so a very small amount of gap between screws, but not noticeable unless looking very closely for it. Easy install, remove 3 screws, put it in, screw them back in. Just put around 900 miles with it on for BBB in Arkansas and it worked awesome. For the price, highly recommended.
J**R
9" windscreen
the fitment was not as good as the original HD windshield . this item is twice as thick as the original so the faring has a small gap . also the bend on this item did not match the bend in the fairing , but I was able to make it fit with a heat gun . this does deflect the wind and looks great .
D**N
Very thick and sturdy, very easy to modify to fit Early models, or aftermarket fairings
I have an aftermarket dead center faring on an 07 road king. The outer holes didn’t quite line up with my fairing mount. No big deal. I drilled holes along side the outer most holes and it fit just fine. The color is good, I can see light through it just enough. Vision is distorted through the “wave“, but I don’t think this will be much of a problem for me. It is really thick and sturdy. There is a heavy bead that runs around the top perimeter of the windshield, with the thickest part being the very top. I measured it with a caliper at about a quarter inch. It came nicely wrapped with no scratches or blemishes.
F**E
Shorter, less buffering and looks good.
It is shorter than the stock windscreen. But there is a bit less buffering on my helmet. At 60 it is much less. At 80 buffering is less intense maybe just a different frequency.Overall I like it. It also looks good.If you except to look through and see forget it a massive distortion due to the extreme curves it present. But I don't look through I look over. It is installed on a 2018 Electra Glide Ultra Low. I am 5'11".
M**1
Works on metrics too!
I used this windshield on my '13 Suzuki C90T that has a fairing. The height it added was perfect for my needs and worked out great! I drilled two little holes to make the bolts fit in the right spot with NO issues!
Z**U
does not fit
reasonable price just does not fit, broke out my fairing nut that holds the windshield in place because it does not have the right curve to it and was too much pulling pressure to hold it in place
S**L
Sturdy , looks good and do the job
The media could not be loaded. Easy install, fits perfectly on 2014 Street Glide Special and does the job , can go wrong for the price.
J**É
Windshield Harley
Top nutch !!
Trustpilot
3 weeks ago
2 weeks ago