ESR for MagSafe Car Mount, Car Phone Holder for iPhone 17-12,Samsung/Google

There are four common method of securing a phone in a car: (1) Window suction mount, (2) Air vent clip bracket, (3) Adhesive mount, (4) Weighted dash non-slip mount base. I ended up choosing to use the air vent clip method because it worked better for our situation. POTENTIAL PROBLEMS — I was concerned about this category of mount design because I read various product reviews that mention the vent fins eventually breaking, bending, or being damaged. I notice that vent fins vary in thickness and strength depending on the vehicle. So, I took a bit more time researching available products and decided on this one because it seemed sturdy and the adjustable solid retainer piece seemed well designed. BETTER DESIGN — Something important about this vent mount design is that it has two solid supporting feet to keep the bracket stable, putting less strain on the vent fins. The retainer clip that goes in and holds to the back of the vent fin is easy to extend and tighten. BEST INSTALL — Based on concerns about vent fin damage, I've decided to gently position this mount so the stabilizer feet are in place, and the metal hook retainer gently holds to the back of a vent fin, but I do not tighten the bracket to the max. This is important during use, and also when removing the phone. Rather than pulling hard on the phone trying to separate it from the bracket, which could pull the vent fin assembly out of the dashboard, instead, I use two hands to have one and holding the base and the other pulling on the phone. The weight of the phone helps hold the mount secure. I'm not off-roading or driving over potholes, so I'm not worried about the phone shaking and the bracket falling out. MAGNETS — It's hard to know what the experience of others will be, but the phone I use with the mount is an iPhone 14 Pro Max, so it is a bit heavy. I use a case with an embedded strong magnetic MagSafe ring in the case. I also use a MagSafe magnetic ring holder that allows for pass-through functionality of the MagSafe magnet connection function. As a result, from my experience, my phone holds very securely to this mount. MAGNETIC PHONE HOLDER RING — My magnetic phone holder ring has a stowaway 360-degree adjustable holder ring/loop, so I'm able to easily attach and remove my phone from the holder. I do notice that my phone holder ring tends to stick more securely to the mount than to my phone, so when I remove the phone, the ring stays on the mount. Sometimes that's preferred, other times, if I want to bring the phone holder ring with me, I'll remove it and put it on the phone. CONCLUSION — Due to variations in automotive fan vent fin assemblies, and variation in phones, cases, and accessories, it's possible there's not one perfect mount for everyone's situation. Yet, this unit does seem stable and versatile.

Love it!!!! This is probably the best vent mount ive ever used. The 3 legs help hold and support the mount along with the phone, strong magnet. Box does come with a magnet ring you could put on your phone case if its not magsafe style. This thing is sturdy, as a delivery driver having the ability to just pull the phone off and walk out without needing to press a button to let the phone go was a must! Dont think about it.JUST BUY IT!!!!

I originally bought one ESR MagSafe Car Mount just to “try it out.” Big mistake. Because it worked too well. Next thing I know, I’m back ordering five more like I’m stocking up for the apocalypse—but make it hands-free. The magnet is STRONG strong. Like, hit-a-pothole-while-grabbing-coffee strong. My phone doesn’t wobble, slide, or attempt a dramatic escape during sharp turns. It stays put, behaving better than most passengers. It clips easily onto the air vent, looks clean (no clunky plastic eyesore), and holds every phone we’ve thrown at it. iPhones? Yes. Samsung? Yes. Random phone with a metal ring? Also yes. Simple, reliable, zero nonsense. No charging built in—and honestly? Fine. I came here for phone stability, not a science project. This mount knows its lane and stays in it. Final verdict: If you’re debating buying one, just save yourself the second Amazon trip and buy multiples now. Apparently that’s what you’re going to do anyway. Highly recommend.

I bought this back in April of 2025. Writing this in May 2026. It finally broke; both legs of the holder did break off. The day they broke was the hottest day of spring so far, so the heat may have weakened the plastic. BUT!!! I still think that this is a great product, as it was easy to install and my phone was sturdy and did not fly off. I think it is worth the price

Great item. Able to attach and detach my phone. At first I had issues because the magnet on MY phone case was too strong so I would pull the whole holder off. I recommend making sure your phone's magsafe isn't too strong. Otherwise, you might break a vent or two. After using for a few months, one of the stabilizing arms bent and broke off. I emailed the company and they responded quickly! They sent me a replacement free of charge so I definitely appreciate their customer service. If the magnet is too strong, I recommend putting one of the rings they provide onto the magnet to make it easier to remove your phone.

Great car mount! I’ve been hesitant to get a phone mount that attached to the air conditioner vent-I live in the south where it’s hot and humid and I want ALL the AC air blowing during the summer. I drive a 21 Volvo and have it attached to the passenger side center vent - works great there and very little interference with air flow. I hated the stickiness of my previous car mount and did not want to occupy one of my cupholders with a cup mount. My iPhone attaches easily with the MagSafe case. The magnet is.VERY strong-I never worry about it falling off. In fact, sometimes I have to be a little careful when removing it if I’m not directly in front of it to make sure I don’t dislodge or crack one of the vent clips. It rotates easily, and will stay in place once I have positioned it. It’s very easy to connect my charging cord and keeps everything out of my way. I purchased two more as Christmas gifts for my husband and mother because they both liked it so much. (My mother drives an Acura MDX and her’s worked best attached to the middle driver’s side vent). Have found similar attachments at 2 to 3 times the cost. Great buy!

I’ve had this little mount for about a year now, the magnet is quite strong and works well keeping my iPhone 12 Pro Max secure to the dashboard. I just now installed the vent mount because I didn’t like where I stuck the swivel head that sticks anyplace you could choose. Holds to the vent of my 1996 Integra well, and bonus, the ball that holds the MagSafe mount is the same size ball needed to attach my Garmin! Works well for what I need, got a second one for my truck also it works so well.

It works great. I am taking two stars off bc it’s not a metal arm like it says. Paid more for the one with a metal arm hook and it’s plastic just like my old one from this company. I’m keeping it because I never had a problem with the arm breaking but one of the feet on my old one broke which is why I replaced it with this new one. But there is no difference and the arm is definitely not metal.

CX-30の運転席の右側のエアコン吹き出し口に色々付けてみたが、ハンドル当たる、しっかり固定出来ないとかあり、この3点でガッチリホールドして、ハンドルにも干渉しなく、磁石も強くて、やっと見つけた商品！

Super! Stabilny (wsporniki genialne, magnesy bardzo mocne) Bez problemu utrzymuje iPhone’a 17 pro max nawet jeżdżąc po polskich dziurawych drogach i progach :)

Práctico, el imán es súper fuerte y no estorba la salida del aire si no pongo el celular calidad de construcción 10 de 10 no he probado el soporte con la base que se pega, pero los imanes para las fundas los probé y también están súper fuertes

Great product. The sturdiness and grip are ideal for every day use. The magnets are strong and the stand blends in with really well with dark interiors.

Avoir son cellulaire pas loin dans son champ de vision, on va ce le dire, c'est devenu assez essentiel de nos jours. Tout le monde n'a pas Apple Car Play, par exemple et l'on veut tout de même profiter du GPS et de son Spotify sans avoir à faire tenir son cellulaire dans un étau de plastique qui n'est pas toujours pratique d'utilisation. Quand on a un iPhone avec Magsafe, il y a de bien meilleures solutions... POURS : - Une fois facilement installé dans une des ventilations de votre voiture, le support ne bougera plus. Ça devient comme un élément du véhicule. Donc pas de soucis de décrochage, de chute... de "où il est donc passé ? Il est tu tombé sous le siège ?". - C'est magnétique, mais ça tient ! Mon iPhone n'est jamais tombé... même pas sur les belles routes de Montréal (gage de solidité absolu). - Le téléphone se pivote super facilement de la verticale à l'horizontale et inversement. - On place le téléphone en un quart de seconde... et on le retire tout aussi vite. Y'a aucun ajustement à faire... c'est juste parfait ! - Aucun bras télescopique qui prend de la place ou qui cache la vue. CONTRES : - Y'en a pas vraiment... le même avec la recharge sans fil peut-être ? Conclusion : Avec un iPhone compatible Magsafe, ce support est parfait. Ça m'a pris une minute pour l'installer : dévisser une tige métallique, placer le support, resserrer la tige jusqu'à ce cela ne bouge plus. Et voilà ! Ça a l'air solide... si jamais ça vient à changer, je repasserai modifier mon commentaire.