Ignition Switch with Key, Replacement Mobility Scooter Spare Start On/Off Ignition Switch with 2 Keys for Pride

Fits my EV rider mobility scooter. There is some interference with the key cover which makes it difficult to turn. I am sure this could be shaved down to work better, but I chose to just use the second key without the rubber cover. It works great. This is a little wider than the stock switch, but the hole in my dash was a little wider also.

Works great

Was told it would be $200 to fix my scooterthey couldn’t replace a switchAmazon had themGreat pricesEasy to install

It worked well. Problem I had was the wires inside the scooter weren't long enough and I had some difficulty soldering it in. It's nice because the housing around the key is wide so fingers that aren't so nimble can easily handle it.

Used the switch for a mobility scooter lift and works fine. Looks like the factory one it replaced.

Easy to install

I bought this key switch to repair my Victory LX Sport Heavy Duty Mobility Scooter. It is the exact same key switch as the original. Perfect fit. Of course, all this depends upon the person repairing the scooter being reasonably handy and having a 22mm deep well socket to loosen and tighten the locking nut, and being able to solder the wires onto the new switch. Otherwise, access to replace the key switch is just a matter of eight or ten Philips screws holding the housing together.

Bought in November…. Died in April. Not great but it’s about the only option for these.