Gray Forest

Got this to provide a smoother transition between rooms for my mom's wheelchair. The old transition was wood and chunkier making the wheelchair bump into the transition rather than go over it. This one is lower profile so the wheels have less resistance. The stickum didn't really stick in my case. I probably should have really scrubbed the floor but I just did a light cleaning so it failed. I had to revisit sticking it to the floor with aftermarket means. Its been a few months and the thing is still kickin' so I'd say its working out well.

I really didn’t think these would work, but they are holding up well. They are a little longer than door opening, easy to cut to size. Start with a clean floor and good to go.

Does the job. Be prepared may need glue to adhere to floor.

Smooth transition from closet floor to bath floor. Self adhesive seems to hold .

Replaced metal strip with the light grey strip - ceramic tile to carpet threshold. Much cleaner and smoother look. Very easy to cut & install. Liked the professional look so much we ordered a second one.

I've been using this for months so far, and just getting around to a review. I laid this down a singular time, and it hasn't slipped or repositioned at all. I have five dogs, four cats, and two children, plus myself. We are in and out of this bathroom every single day, multiple times a day, and this hasn't even so much as dented or lost its finish. I will definitely buy this particular transition strip every time I need to still up flooring transitions that are same height. It was really easy to install, I just had to peel off the back and lay it down on a clean surface. It cuts really easily and has a really accurate color to what is shown.

This ended up looking nice as an edging for carpet in a closet. 2 dings: 1) I had to leave it unrolled for two weeks to get mostly flat 2) The sticky on it worked in the middle but not on the edges. So I had to use some 3M HD double stick tape to hold down each end.

Works beautifully. Very easy to install. Easy to cut to size.

I used this floor transition strip to cover the small gap between two different types of flooring in my doorway, and it worked perfectly. The strip creates a smooth transition between surfaces like laminate, tile, or vinyl, which not only improves the look but also helps prevent tripping over uneven edges. The Gray Forest color blends nicely with most modern floors and gives the area a more finished and professional appearance. Installation was very simple thanks to the self-adhesive backing. I just cleaned the surface, peeled off the protective layer, and pressed the strip into place. It stuck firmly and didn’t require any tools, drilling, or extra materials. The 40-inch length was ideal for my doorway, and it can easily be trimmed if you need a custom fit. Overall, this transition strip is a great and affordable solution for small floor height differences up to about 5 mm. It looks good, installs quickly, and helps protect the edges of your flooring. Definitely recommended for anyone looking for an easy way to improve the look and safety of their floors.

I bought this to hide speaker wire along a tile/ mahogany hardwood transition. I cut using an exacto knife and repeatedly scoring, and I used tin snips to make finer cuts. Adhesive is very good, easy to cut, soft underfoot. After laying product with this type of adhesive, I always use a blow dryer to warm gently, which allows the adhesive underneath to spread a bit and make a better bond with the contact surface. Warm GENTLY if you do this, or you’ll ruin the vinyl! Another application tip is to lay it in place first BEFORE peeling the red adhesive strip label. Then, pick away one corner, and with the strip in place face down, slowly peel away the red tape from underneath by pulling towards you, moving down the strip slowly, keeping the strip in place with one hand as you move along the strip pulling the tape off from underneath with the other. Finally, if your surface is very uneven, this will look bumpy. The adhesive is only on the lower, thick halF; essentially, the thinner lip on top lays on the higher surface, so laying the strip straight is essential. Minus one star for high price, and it being made with adhesive along just half the length of the strip.

Perfect! We needed to transition from carpet to laminate to vinyl roll flooring in a single strip and this worked beautifully!

The floor transition is in a style of flexible plastic but it doesn't look fake. I was surprise when I've put it to make the transition between my 2 rooms. People tend to tell me that it look natural and are always surprised when I tell them for how much I got it. Really easy to install, it is long so you have to cut it to the right length which is a nice addon because you don't feel like you need the absolute right length right from the bat.

Does not stick. Very disappointed. Don't waste your money!