Fuel Transfer Pump, 10GPM 12V Transfer Pump with Discharge Hose ＆ Automatic Nozzle, Cast Iron Heavy Duty for Gasoline, Diesel, Kerosene, Biodiesel

This fuel transfer pump worked very well once I got it sorted out. The automatic handle works and that's nice. Now the problems. There are no installation instructions although the picture of the installed pump did help. There is an on/off switch although it's not labeled either on the pump or in the literature with the pump. There is no indication of flow direction on the filter base - I figured it out by knowing how fuel flows through the filter then looking at the base carefully. The suction pipe max length is 31" but I needed 44" - 1" threaded pipe works. After all was installed, the pump didn't pump even though the motor ran. I opened the pump side cover (side opposite the motor) and discovered the "O" ring was not seated correctly - easy fix and now it works. Overall, when problems are sorted, it's a quality pump at a price lower than much more expensive pumps that look exactly the same - I suspect they are the same but likely with better labeling and actual installation directions. For me, it's 5 star but if you aren't willing to sort things, fewer stars for you.

This is well built and a nice complete kit. I have to return as thread size didn't match my tank. Thanks Amazon for refund

Exactly as described. Easy to install

Only use it for a couple of days, but we did move 600 gallons of diesel with it. It was easy.

I installed this on my mobile gas caddy and it worked great. Twice. After that, it would not pump the gas. Motor would turn on, but it would not prime. I tightened the connections and this seemed to fix it. Ok, it was sucking air, no big deal, right? Long story short, I figured out I have to either pressurize my tank or flip the filter upside down to prime the pump to get it going. I have not reached out to customer service yet, but will update after I do.

I used the pump maybe 10 times and it quit pumping need to contact someone about what they can do about it

Easy to assemble and pumps fast. Highly recommend.

The pump's performance is okay, managing a 15GPM flow rate with a decent suction depth and lift height. However, the build quality feels a bit on the average side; the cast iron construction seems durable but not particularly high-end. It does come with a decent quality filter, which is a nice touch.One aspect that requires attention is the fittings. They can leak if not assembled with care, but with some patience and proper sealing, you can achieve a leak-free setup. A good quality yellow gas PTFE tape and some fuel rated sealant such as Gasoila or Permatex PermaShield Orange helps a lot.Another thing that could use an upgrade are the battery clamps, they are a bit thin and can be difficult to get good contact with battery terminals. I replaced the clamps with a quick disconnect, crimped on some inline fuses and ring terminals that are bolted to the battery. This provides a much more secure power connection.The pump includes thermal overload protection, which adds a layer of safety by preventing motor overheating, and it has an independent grounding wire for safe operation.Overall, if you're looking for a budget-friendly option, this pump might work for you. It's not the best quality out there, but with a little effort, you can make it function reliably. Just be prepared to spend a bit of time ensuring the fittings are sealed and torqued properly, and possibly upgrading some components.