MoenChateau Chrome Single Handle Posi-Temp Tub and Shower Faucet Set with Showerhead, Lever Handle, and Tub Spout, Valve Included, L2353

This was easy to install and the directions were spot on.

I recently replaced all the fixtures in my home with the Moen Chateau line, primarily due to the beauty and simplicity of the faucet design. No exception here...the shower valve and fittings all look great. The only thing keeping me from dropping a 5-star rating on it is the lack of pressure from this shower head. The 10 year old shower it replaced had great pressure. I'm not sure if Moen intentionally made it ultra-low-flow (it doesn't specify in the product information) or if I possibly got a bum piece, but I'll be changing the head alone out for a handheld with better pressure ASAP.

Love that the handle and tub spout are both metal. However, the handle (seeing it in person) reminds me of an apartment or cheap hotel design, but other than that it functions well. The shower diverter doesn't leak at all (yay!) and has solid, crisp latching when pulling or releasing. We had this kit professionally installed (hired through Amazon) and they did a flawless job with the installation.

We remodeled a bathroom and went for this "cheap" kit. I was surprised how great it is. The trim kit is only plastic but that's fine. The valve behind it is brass. Also the shower head is great, providing a good stream of water, much better than expected. Can only recommend this product.

Mixer does not have the threading to screw on the pipe fittings, needs to be soldered on and if too much heat is used it could damage the seal inside so remember to take out the cartridge before welding

This is great. You will need to sweat in your own connections to the valve body. Easy to remove the cartridge. Solid metal handle, but the spout is cheap plastic. Upside of the spout is that it's a slip fitting with a set screw and the o-ring seal is only half inch from the wall meaning it's great for remodel if you need to cut back the stub out for the previous spout. The plate is has one of best seals I've seen, no need to caulk it after install. The escutcheon for the shower head neck is not tight fitting, some small kinks on the inner side will make it stay put. Great for all around, definitely not for someone who can't sweat pipe.

Bought this to replace an old leakey three valve unit. Also purchased the American made cover plate to cover the two extra holes in my tub wall. This unit is slick! It does not adjust the amount of water flow but the shower head pretty much takes care of that. Simple counter clock wise turn to the 10 o'clock position, pull the shower head diverter and you're ready to go. Turning back clockwise to the 6 o'clock position quickly turns the water off. All metal construction with no plastic! Made in America!

Moen quality, and trouble free several years later. Treat yourself to a better finish however. This finish is a bit on the generic side and can use some personality.

Everything that came in the box was as described. Installation was straight-forward (if you have some know-how). Note that the shower head and shower handle are metal, but all other parts are plastic. This isn't really a big deal, but we would have preferred the tub diverter spout to be metal. Also note that the tub diverter spout uses a pressure-based fitting, which makes installation easy, but is more prone to leakage over time if you're installing this set somewhere that goes through major temperature changes, which could cause metal to expand/contract significantly (i.e. a cottage that is empty in the winter and very cold).We did install this set at our cottage, so we swapped out the plastic tub diverter spout for an older metal spout with a screw-on style fitting... however this is harder to install properly, so unless you need to do this, probably it's unnecessary.

perfect fit to replace an old set of Moen taps. Delivered on time

Good tap have had for several years now and still working great

good as expected